MUSCUTO
MOP-61 MUSCUTO Nine-Tails Matsuri / Utage Joint 2 Pieces Set (3D Printed Parts)
MOP-61 MUSCUTO Nine-Tails Matsuri / Utage Joint 2 Pieces Set (3D Printed Parts)
Max is 2 per customer.
Couldn't load pickup availability
MOP-61 MUSCUTO Nine-Tails Matsuri / Utage Joint 2 Pieces Set (3D Printed Parts)
100% Authentic
Creator: MUSCUTO
This is custom parts for 1/12 Megami D Nine Tails series for Matsuri / Utage.
- Full color 3D Printed Parts.
- Assembly and gluing required.
- Total pieces : 2 ( See photo 1)
*These are the same joints that come with MGM-88/89. Please use this as a reference.
*The pins connecting the thighs are designed to be longer than before.
If the thigh connection is too tight while assembling,
cut off some of the pins and use them.
Applying excessive force may cause damage. Please be careful.
*The movable joint parts vary depending on the product, so they may need to be trimmed.
*1 set consists of 2 sets (left/right)
*3D printed parts are designed to be tight.
If you are having trouble assembling the parts, use a hair dryer or similar device to soften them and then reassemble them.
***Photos are final complete model kit as reference ONLY.***
For Adult ONLY! You must be age over 18 to purchase this item.
This item is for buyer over 18 years old. 
We will guide you through assembly and gluing.
- This product is a resin cast kit that requires assembly and gluing.
- Superglue (Purchase from Hobby Lobby, Daiso, or any local Model Kit store) is required for gluing. If you use regular plastic model adhesive, it will not adhere and the glued parts may come off.
- Movable joint parts vary depending on the product, so it may be necessary to trim them.
- Do not use excessive force to assemble. There is a risk of damage.
About correction of resin cast parts
- Because the parts are hand-produced, there may be small air bubbles or unformed parts in the parts. Thank you for your understanding.
- If the parts are not assembled properly due to deformation, please use warm water or a hair dryer to soften them, correct the deformation, and then reassemble.
- Check out the video on how to fix parts.
https://youtu.be/zSVOXfyTEBQ?si=4iJ_I0EvoV25E41f
Inquiries regarding product defects:
- For replacement of missing or defective parts, please contact creatorsolo2025@gmail.com.
Warning! 
Choking Hazard- Small parts. Not of children under 15 years old.
- Please handle with care and store out of the reach of children younger than 15 years old.
- This product may contain small parts. May be harmful if swallowed.
- This product may contain parts that have sharp points and edges. Please handle it carefully to avoid getting injured.
For inquiries regarding after-sales service, please contact creatorsolo2025@gmail.com.
Share
 

 
               
    