[MGM-EX15] MUSCUTO Nine-Tails Matsuri Face Parts Set <For ASRA>

[MGM-EX15] Nine-Tails Matsuri Face Parts Set <For ASRA>

Creator: MUSCUTO

100% Authentic

For Adult ONLY!   You must be age over 18 to purchase this item.

This item is for buyer over 18 years old. 

Megami Device Nine-Tails Matsuri 12.1 is required for completion. 
Full color resin cast specification.
Assembly and gluing required.
As a pre-order item, it will take more than one month from production to
shipping. Thank you for your understanding.
 
Parts composition
- 1 type of hair part
- 1 types of Plump thighs parts 
- 7 types of face parts 
- 1 type of inner frame part for thighs

Photos are final complete model kit as reference ONLY.

Instant Adhesive Usage Guide
http://muscuto.com/xe/EventInfo/8585

1. This product is an advanced assembly method, resin color resin cast kit.

2. You will need instant glue to assemble this kit. If you use regular 
   plastic glue, it may not stick or may come off easily.

3. In the case of adhesive pins for movable joint parts, in some cases, 
   you may need to cut a small piece off before use. We recommend that 
   you do not glue them to the resin parts immediately, but check that 
   they are the appropriate length (position) before gluing them at the end.

4. Because this product is handmade, there may be small imperfections or 
   air bubbles in the product. You can fix these by processing and gluing spare 
   pieces of the same color, then scraping them off.

Click on the LINK below for a detailed explanation. 
http://muscuto.com/xe/EventInfo/5197

5. If the joints are very stiff and difficult to move immediately after 
   assembly, do not force them (this can damage the joints). Instead, apply a 
   small amount of grease or cooking oil to the inside of the joints and wait a 
   while before moving them. 

6. Parts that are difficult to distinguish between left and right are marked 
   with a ▲ mark on the right and a ● mark on the left.

7. If the parts are deformed or not well connected, they may have deformed 
   during shipping or storage. Resin parts can be softened in hot water 
   (50 to 70 degrees). Place the parts that don't fit together that are easy to 
   straighten in hot water to soften them, then combine them with the other parts 
   to straighten them, then place them in cold water to harden them again. 
   This method is a good way to straighten your swimsuit if the abdomen and pants 
   are slightly open. However, if the parts are too thin and large, the weight of 
   the parts themselves may make it difficult for them to return to their original 
   shape after they have softened, so rather than simply putting them in hot water, 
   it is better to soften only the parts that need straightening and straighten the shape.

8. Click the link below to learn how to use the eye decals on the facial features.
http://muscuto.com/xe/gallery/5003

9. For inquiries regarding after-sales service, please contact creatorsolo2025@gmail.com.

Warning! 
Choking Hazard- Small parts. For age 18+ years old.
- Please handle with care and store out of the reach of children younger than 15 years old.
- This product may contain small parts. May be harmful if swallowed.
- This product may contain parts that have sharp points and edges. Please handle it carefully to avoid getting injured.