MOP-37 ASRA 1.5 Thigh Joint 2-piece set 

MOP-37 ASRA 1.5 Thigh Joint 2-piece set

Creator: MUSCUTO

100% Authentic

For Adult ONLY!   You must be age over 18 to purchase this item.

This item is for buyer over 18 years old.

*The joints are 3D printed parts.
*The movable joint parts vary depending on the product, so they may have to be trimmed.
*Colors may not match per product.
*Do not use excessive force when assembling as this may result in damage.

Full color resin cast specification.
Assembly and gluing required. As a pre-order item, it will take more than one month from production to
shipping. Thank you for your understanding.

Parts composition

- Joint parts (3D printed)
*Full color resin kit specification

Photos are final complete model kit as reference ONLY.

Instant Adhesive Usage Guide
http://muscuto.com/xe/EventInfo/8585

1. This product is an advanced assembly method, resin color resin cast kit.

2. You will need instant glue to assemble this kit. If you use regular
plastic glue, it may not stick or may come off easily.

3. In the case of adhesive pins for movable joint parts, in some cases,
you may need to cut a small piece off before use. We recommend that
you do not glue them to the resin parts immediately, but check that
they are the appropriate length (position) before gluing them at the end.

4. Because this product is handmade, there may be small imperfections or
air bubbles in the product. You can fix these by processing and gluing spare
pieces of the same color, then scraping them off.

Click on the LINK below for a detailed explanation.
http://muscuto.com/xe/EventInfo/5197

5. If the joints are very stiff and difficult to move immediately after
assembly, do not force them (this can damage the joints). Instead, apply a
small amount of grease or cooking oil to the inside of the joints and wait a
while before moving them.

6. Parts that are difficult to distinguish between left and right are marked
with a ▲ mark on the right and a ● mark on the left.

7. If the parts are deformed or not well connected, they may have deformed
during shipping or storage. Resin parts can be softened in hot water
(50 to 70 degrees). Place the parts that don't fit together that are easy to
straighten in hot water to soften them, then combine them with the other parts
to straighten them, then place them in cold water to harden them again.
This method is a good way to straighten your swimsuit if the abdomen and pants
are slightly open. However, if the parts are too thin and large, the weight of
the parts themselves may make it difficult for them to return to their original
shape after they have softened, so rather than simply putting them in hot water,
it is better to soften only the parts that need straightening and straighten the shape.

8. Click the link below to learn how to use the eye decals on the facial features.
http://muscuto.com/xe/gallery/5003

9. For inquiries regarding after-sales service, please contact creatorsolo2025@gmail.com.

Warning!
Choking Hazard- Small parts. For age 18+ years old.
- Please handle with care and store out of the reach of children younger than 15 years old.
- This product may contain small parts. May be harmful if swallowed.
- This product may contain parts that have sharp points and edges. Please handle it carefully to avoid getting injured.